Actron Air AIRES Inverter Split Systems – Three Phase

Capacities
Single Phase – 5.0kW | 5.6kW | 7.1kW

Key Features

• Silent operation
• High power mode for rapid cooling and heating
• Weekly / Sleep timer
• Dry operation to reduce humidity
• Economy mode

Capacities
3 Phase – 10.0kW | 12.5kW | 14.0kW | 16.0kW | 20.0kW | 23.5kW

Key Features

• High power mode for rapid cooling & heating
• Weekly & Sleep timers
• Silent operation
• Dry operation to reduce humidity
• Economy mode to reduce power consumption

Capacities
Single Phase – 10.0kW | 12.5kW | 14.0kW | 16.0kW

Key Features

• High power mode for rapid cooling & heating
• Weekly & Sleep timers
• Silent operation
• Dry operation to reduce humidity
• Economy mode to reduce power consumption

Fujitsu Infra-Red Receiver Kit used to convert a hard wired remote controller to IR hand remote for control over Fujitsu ducted range. Using the IR remote control system, users can run and stop the unit, switch operations, adjust the temperature, fan speed and air  flow direction.

Fujitsu 24V Zone Controller
(UTY-CDPXZC)

Fujitsu 24V Interface Module – Controls up to 8 zones.

Fujitsu 240V Zone Controller
(UTY-CDPXZC)

Fujitsu 240V Interface Module – Controls up to 8 zones.

Fujitsu External Input / Output PCB
(UTY-XCSX)

The UTY-XCSX is an external connect kit that allows you to connect with external devices and air conditioner PCB.

Fujitsu PCB Bracket
(UTY-GXNA)

Fujitsu Bracket for External Input and Output PCB.

Fujitsu External Wiring Kit
(UTY-XWZXZG)

The Fujitsu UTY-XWZXZG allows you to activate and deactivate your system through external input.

Fujitsu Drain Pump
(UTY-PX1NAB)

Fujitsu Drain Pump Unit for Fujitsu Ducted Units.

Fujitsu Condensate Drain Pump Kit
(UTZ-PX1NBA)

Drain Pump Kit for Medium Static Pressure Ducted Units.

Fujitsu Round Flange
(UTD-RF204)

Round Flange – Set of 4 x Pops.

Fujitsu Square Flange
(UTD-SF045T)

Square Flange for Medium Static Ducted Units.

Capacities
Reverse Cycle – 10.5kW | 12.5kW | 15.0kW | 18.0kW | 20.3kW | 25.0kW

Key Features

• Zone Control This function enables efficient air-conditioning by selecting specific zones from the various zones divided within the indoor space.
• Auto Restart Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
• Auto Changeover The unit automatically switches between operating modes based on the temperature setting and room temperature.
• Blue Fin Heat Exchanger Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
• Connectable Distributing Duct Systems are capable of attaching a field-supplied branch ducts distributing the airflow.
• Connectable Fresh Air Duct Allows introduction of fresh air to the occupied space.
• Demand Response This product is designed to be compatible with Air Conditioning Demand Response program. When your electricity supplier activates one of the three modes the air conditioner switches over to the appropriate operation.
• All DC With All DC, electricity loss is decreased and power consumption reduced.
• Economy Mode Limits the maximum operation current, and performs operation with the power consumption suppressed.
• Filter Sign Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.
• On-Off Timer ON-OFF timer can be set to operate once every 24 hours.
• Program Timer This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.
• Weekly Timer Different ON-OFF times can be set for up to 7 days.
• In-Built Drain Pump The drain pump is in-built into the system.
• Operating Temperature Range 50°C The maximum guaranteed operating temperature range to 50 degrees in cooling mode.
• Demo Mode This function allows the indoor unit to be operated alone at exhibitions and showrooms.
• Automatic Static Pressure Setting Adjustment With this feature, the unit automatically sets the optimal static pressure setting, eliminating the need for the installer to select and set the static pressure setting each time.

Capacities
Reverse Cycle – 7.1kW | 9.0kW | 10.0kW | 12.5kW | 14.0kW | 15.5kW | 16.0kW

Key Features

• Zone Control This function enables efficient air-conditioning by selecting specific zones from the various zones divided within the indoor space.
• Auto Restart Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
• Auto Changeover The unit automatically switches between operating modes based on the temperature setting and room temperature.
• Blue Fin Heat Exchanger Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
• Connectable Distributing Duct Systems are capable of attaching a field-supplied branch ducts distributing the airflow.
• Connectable Fresh Air Duct Allows introduction of fresh air to the occupied space.
• Demand Response This product is designed to be compatible with Air Conditioning Demand Response program. When your electricity supplier activates one of the three modes the air conditioner switches over to the appropriate operation.
• Economy Mode Limits the maximum operation current, and performs operation with the power consumption suppressed.
• Filter Sign Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.
• On-Off Timer ON-OFF timer can be set to operate once every 24 hours.
• Program Timer This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.
• Weekly Timer Different ON-OFF times can be set for up to 7 days.
• In-Built Drain Pump The drain pump is in-built into the system.
• Operating Temperature Range 50°C The maximum guaranteed operating temperature range to 50 degrees in cooling mode.
• Demo Mode This function allows the indoor unit to be operated alone at exhibitions and showrooms.
• Automatic Static Pressure Setting Adjustment With this feature, the unit automatically sets the optimal static pressure setting, eliminating the need for the installer to select and set the static pressure setting each time.

Capacities
Reverse Cycle – 7.1kW | 8.5kW

Key Features

• Zone Control This function enables efficient air-conditioning by selecting specific zones from the various zones divided within the indoor space.
• Auto Restart Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
• Auto Changeover The unit automatically switches between operating modes based on the temperature setting and room temperature.
• Blue Fin Heat Exchanger Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
• Connectable Distributing Duct Systems are capable of attaching a field-supplied branch ducts distributing the airflow.
• Connectable Fresh Air Duct Allows introduction of fresh air to the occupied space.
• Demand Response This product is designed to be compatible with Air Conditioning Demand Response program. When your electricity supplier activates one of the three modes the air conditioner switches over to the appropriate operation.
• Economy Mode Limits the maximum operation current, and performs operation with the power consumption suppressed.
• Filter Sign Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.
• On-Off Timer ON-OFF timer can be set to operate once every 24 hours.
• Program Timer This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.
• Weekly Timer Different ON-OFF times can be set for up to 7 days.
• In-Built Drain Pump The drain pump is in-built into the system.
• Operating Temperature Range 50°C The maximum guaranteed operating temperature range to 50 degrees in cooling mode.
• Demo Mode This function allows the indoor unit to be operated alone at exhibitions and showrooms.
• Long Piping Capability 75m This product is equipped with a maximum pipe length of 75m.

Capacities
Reverse Cycle – 5.0kW | 7.1kW | 8.5kW | 10.0kW | 11.5kW | 13.0kW

Key Features

• In-Built Safety Tray  The safety tray and drain port is in-built into the system.
• Program Timer This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.
• Economy Mode Limits the maximum operation current, and performs operation with the power consumption suppressed.
• Zone Control This function enables efficient air-conditioning by selecting specific zones from the various zones divided within the indoor space.
• Auto Restart Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
• Auto Changeover The unit automatically switches between operating modes based on the temperature setting and room temperature.
• Blue Fin Heat Exchanger Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
• Connectable Fresh Air Duct Allows introduction of fresh air to the occupied space.
• Connectable Distributing Duct Systems are capable of attaching a field-supplied branch ducts distributing the airflow.
• Demand Response This product is designed to be compatible with Air Conditioning Demand Response program. When your electricity supplier activates one of the three modes the air conditioner switches over to the appropriate operation.
• Filter Sign Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.
• On-Off Timer ON-OFF timer can be set to operate once every 24 hours.
• Weekly Timer Different ON-OFF times can be set for up to 7 days.
• Operating Temperature Range 50°C The maximum guaranteed operating temperature range to 50 degrees in cooling mode.
• Demo Mode This function allows the indoor unit to be operated alone at exhibitions and showrooms.

Capacities
Reverse Cycle – 2.6kW | 3.5kW | 5.0kW

Key Features

• All DC With All DC, electricity loss is decreased and power consumption reduced.
• Auto Restart Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
• Auto Changeover The unit automatically switches between operating modes based on the temperature setting and room temperature.
• Blue Fin Heat Exchanger Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
• Economy Mode Limits the maximum operation current, and performs operation with the power consumption suppressed.
• Fresh Air Intake Fresh air can be taken in by a fan which can be connected using external control unit.
• On-Off Timer ON-OFF timer can be set to operate once every 24 hours.
• Removable Intake Grille The indoor unit’s intake grille can be removed for easy cleaning and maintenance.
• Weekly + Setback Timer Weekly + setback timer can set temperature for two time spans and for each day of the week.
• Weekly Timer Different ON-OFF timers can be set for up to 7 days.
• Automatic Air Flow Adjustment The micro-processor automatically adjusts the air flow to follow changes in room temperature.
• Connectable Distributing Duct Systems are capable of attaching a field-supplied branch ducts distributing the airflow.