Key Features

• Power using 18V Li-Ion batteries or AC Power
• Adjustable tilt up to 90 degree and down 45 degree
• 180m/min maximum wind speed
• Compact design for confined or smaller spaces
• Off timer switch (1/2/4 hours)
• 3 Speed modes
• Adjustable hook

Makita 40V Max 235mm (9-1/4″) Jobsite Fan
(CF001GZ)

Key Features

• Automatic oscillating fan increases airflow dispersion
• Powered by either 40V XGT batteries or AC power
• 190m/min maximum air speed with 3 wind speed settings – High / Medium / Low
• Off timer function with 1, 2 and 4 hour settings
• Quiet running noise level of only 48dB due to redesigned fan blades

Makita 12V Max Heated Jacket
(CJ105DZ)

Key Features

•  5 heat zones: Left / Right front pockets, Left / Right back shoulders and Middle of back
• 3 heat settings: High / Medium / Low – for comfortable heating control
• Up to 14 hours runtime on low using a 4.0Ah battery
• Machine washable*, waterproof & windproof (*Soft wash in water less than 30°C – Battery & Holder must be removed)
• On / Off heat controller with LED indicator

Makita 12V Max – 18V Coffee Machine
(DCM501Z)

Key Features

• Powered by either 12V Max or 18V battery
• Brewing is easy with pre-ground coffee
• Continuous 300W brews a 160mL shot in approximately 5 minutes
• Dedicated sealed coffee cup
• Terminal protection cover

Makita Digital Bluetooth Jobsite Charger Radio
(DMR301)

Key Features

• Charges 18V and 12V Max batteries when connected to AC power
• Digital and AM/FM Radio with Bluetooth for audio streaming
• 2 x large 89mm speakers provide 3.5W* x 2 high quality audio(*Practical max. output when powered by an 18V battery)
• Compact design with IP64 rating, ideal for jobsite conditions
• USB port 2.4A for charging mobile devices

Makita 40V Max LED Flashlight
(ML001G)

Key Features

• 12 Position pivoting flashlight head swivels from 0 to 170 degrees
• 34hrs of continuous illumination / runtime on a 2.5Ah battery
• 4 x 0.5W LED’s provide brightness of 160lm

Makita 40V Max LED Torch
(ML002G)

Key Features

• 360 degree illumination with 20 bright white LED lights
• Up to 32hrs runtime on a 2.5Ah battery
• 20 x 2W LED produces 710lm of brightness
• USB output port, able to charge mobile devices with 2.1A max
• 3 stage LED brightness switch, full, half or single LED

Makita 40V Max LED Worklight
(ML003G)

Key Features

• High brightness white LED lights provide 1,100Lm of brightness
• Powered 40V Max XGT or 18V LXT Batteries
• High durability IP56 rated for protection against water and dust
• Runtime of up to 10 hours in High when powered by optional 4.0Ah battery
• Head pivots 240° for optimal light angle direction

Makita 40V Max LED Worklight
(ML005GX)

Key Features

• High brightness white LED lights provide 3,600Lm of brightness
• Powered 40V Max XGT or 18V LXT batteries
• High durability IP65 rated for protection against water and dust
• Runtime of up to 3 hours in High when powered by optional 4.0Ah battery
• Lighting coverage 6.0m in front and 6.4m wide

Makita 40V Max LED Rotating Flashlight
(ML006G)

Key Features

• Flashlight head folds up and down plus rotates left to right for multiple lighting angles
• High brightness white LED lights provide 500Lm of brightness
• Metal hang hook swivels 360° and folds away for extra convenience
• 3 stage brightness settings delivers either full brightness (500Lm), Medium (250Lm) or Low (100Lm)
• Runtime of up to 20 hours in High when powered by optional 4.0Ah battery

Makita 40V Max Long Distance Flashlight
(ML007G)

Key Features

• Long beam distance lights up objects 640 metres away
• 4 output modes; Spotlight, Floodlight, Spot/Flood and Strobe
• High brightness neutral white LED lights provide a maximum 1,250Lm
• Continuous runtime up to 14 hours with optional 5.0Ah in spotlight mode
• Extreme Protection Technology (XGT) engineered for improved dust and water resistance for operation in harsh conditions

Makita 40V Max High Brightness LED Worklight
(ML009GX)

Key Features

• High brightness white LED lights provide 10,000Lm of brightness
• Powered 40V Max XGT or 18V LXT batteries
• High durability IP65 rated for protection against water and dust
• Runtime of up to 2.4 hours in High when powered by 2 x optional 4.0Ah batteries
• Lighting coverage 9.7m in front and 11.4m wide

Makita 40V Max LED Compact Flashlight
(ML011G)

Key Features

• Compact design for use in small spaces
• Dual direction lighting both horizontal and vertical
• USB output for changing mobile devices
• Two stage lighting output – High: 300Lm and Low: 150Lm
• Continuous runtime up to 37 hours in high with optional 4.0Ah battery

Makita 12V Max Mobile Compact LED Flashlight
(ML103)

Key Features

• Ultra compact and light weight at only 0.43kg with 4.0Ah battery
• Extreme endurance with up to 28hrs run time
• Bright 100 Lumen output
• Long run time
• Ergonomic design

Makita 12V Max Mobile LED Jobsite Torch
(ML104)

Key Features

• Up to 17hrs runtime with a 4.0Ah battery
• USB output port, able to charge mobile devices with 2.1A Max
• 710Lm of brightness
• 360° illumination with 20 bright white LED lights
• Ultra light weight at 780g in weight with 4.0Ah battery

Makita 12V Max Mobile LED Flashlight
(ML106)

Key Features

• Zoom function adjusts light range for wide or narrow sight
• 4.9W bright white LED light
• 190Lm of brightness
• Up to 12hrs runtime with a 4.0Ah battery
• Less than 1kg in weight with 4.0Ah battery

Key Features

• Strong rare earth magnets keep small parts close at hand
• Breathable mesh interior for comfort
• Made of highly durable 1680d ballistic-weave material
• Fits most wrist sizes
• Secure adjustable hook and loop closure
• Contoured for a comfortable fit around the wrist
• Wrap around your wrist, belt or tool bag to keep small parts easily within reach

Klein Tools Lightweight Gel Knee Pads
(A-60184)

Key Features

• Lightweight knee pads have slip resistant caps to grip kneeling surface, for enhanced stability and balance
• Pressure dispersed with gel and EVA foam that cushions the knee
• Fatigue reduced by a gel design that also provides lightweight comfort and protection
• Top strap is elastic; bottom strap is webbed
• One size fits all
• Cinch-tight straps provide comfortable, snug-fit
• Clips hold tight and keep straps secure

Key Features

• Tool Bag Set includes four assorted colours: olive, orange, royal blue and yellow
• Made of heavy-duty No. 10 canvas
• Features brass zipper to keep secure
• Convenient storage for pliers, wrenches, screwdrivers, nut drivers, and other tools and spare parts

Klein Tools Tool Bag, Tradesman Pro™ Tool Tote, 40 Pockets, 26cm
(A-5541610-14)

Key Features

• Tool Organiser with a large zippered pocket to secure small parts and tools
• Tool bag has a total of 40 pockets for maximum tool storage
• Fully moulded bottom for stability and protection from the elements
• Orange interior helps you find tools faster
• 1680d ballistic weave for durability
• Shoulder strap with extra padding and handles for easy carrying

Klein Tools Tradesman Pro™ Tool Bag Backpack, 39 Pockets, Black, 36.8cm
(A-55421BP-14)

Key Features

• Tool Backpack with 39 pockets for tons of tool storage
• Hard, moulded front pocket protects safety glasses
• Front zip-up pocket for small parts and tools.
• Taller bag and interior pockets allow storage of long screwdrivers.
• Fully moulded bottom for protection from the elements.
• Orange interior for easy tool visibility
• 1680d ballistic weave for durability and water resistance
• Shoulder straps with extra padding and handles for easy carrying

Klein Tools Tradesman Pro™ Bucket Bag

Key Features

• Fits 5-gallon (18.9 l) bucket
• 45 pockets and chain tape thong to carry an assortment of tools
• Double layer of polyester at bucket edges for durability
• Interior pockets include 3 tool sleeves, 1 power tool/cord sleeve and 6 universal pockets
• Exterior pockets include 9 driver pockets, 11 pliers pockets, 11 utility pockets, 2 wire stripper pockets and 2 closable pockets
• Tools not included

Klein Tools Tradesman Pro™ Tool Station Tool Bag Backpack with Work Light
(A-55655)

Key Features

• Backpack with 21 pockets and large interior for maximum tool storage
• Includes removable Torch with Work Light; a bright magnetic torch and broadcasting work light in one tool
• Elastic loop holds work light for hands-free illumination of backpack interior when working in low light areas
• Front of backpack unzips halfway for quick tool access or fully extends for workstation access
• Made of water resistant 1680d ballistic weave material for durability
• Orange interior for easy tool visibility
• Extra padding on the shoulder straps and back for carrying comfort
• Adjustable chest and lower straps for a customised fit
• Front zip-up pocket for small items
• Exterior organisation includes side elastic pouch for water bottle, tape measure clip and tape thong

Klein Tools Tradesman Pro™ 18-Compartment VDV Protech™ Transport Tool Case
(VDV000-133)

Key Features

• Upper tier features (12) organisational compartments designed for small parts such as connectors, screws or other small pieces that you have lying around
• Lower tier has (6) larger and deeper compartments for medium-sized tools, such as wire strippers and crimpers
• Heavy-duty plastic makes the case surprisingly lightweight, despite its durability
• Upper tier of compartments is visible through a transparent, hinged plastic lid
• Textured feet on the bottom of the case improve overall stability, as well as helping to avoid slippage
• The entire first tier of compartments swivels upwards while you access the lower compartments so that you can view both your tools and connectors simultaneously
• Dual metal locks tightly seal the case, and a heavy-duty handle makes it easy to carry
• The sturdy handle clicks vertically into place when in use

Key Features

• Wire Stripper strips 10-20 AWG solid and 12-22 AWG stranded wire
• Multi-Tool crimps insulated and non-insulated connectors
• Tip designed to grab, pull and bend the smallest of wires
• Reinforced head reduces flex; optimised for ideal leverage when stripping and crimping
• Made in the USA
• Precision shear-type cutting blades for easier cutting
• Do not use to cut steel wire
• US Patent D827,403

Klein Tools Wire Stripper and Cutter, Self-Adjusting
(A-11061)

Key Features

• Wire Stripper with stripping head that adjusts to strip: 10-20 AWG solid, 12-22 AWG stranded, 12/2 and 14/2 Romex® cable (all sizes) and other non-metallic (type NM) sheathed cable
• Adjustable stopper to control the length of the core strip
• Tensioning thumb wheel allows precise stripping of smaller-gauge wire
• Convenient wire cutter in handle
• Grooved grips are designed for added comfort
• Perfect for HVAC applications because it allows you to strip the outer jacket from thermostat wire and then all the associated individual wires
• Romex® is a registered trademark of the Southwire Company

Klein Tools Aviation Snips, Left
(A-1200L)

Key Features

• Serrated, forged-steel blades for superior strength and durability
• Cuts 18-gauge steel and 22-gauge stainless steel
• Spring-action lock allows opening of tool with one handed operation
• Features colour-coded, comfortable contoured grips
• Hardened handles for extra strength
• Convenient hanging hole for easy storage
• Conforms to ASME B107.500 performance standard

Klein Tools Aviation Snips, Right
(A-1201R)

Key Features

• Serrated, forged-steel blades for superior strength and durability
• Cuts 18-gauge steel and 22-gauge stainless steel
• Spring-action lock allows opening of tool with one handed operation
• Features colour-coded, comfortable contoured grips
• Hardened handles for extra strength
• Convenient hanging hole for easy storage
• Conforms to ASME B107.500 performance standard

Klein Tools Aviation Snips, Straight
(A-1202S)

Key Features

• Serrated, forged-steel blades for superior strength and durability
• Cuts 18-gauge steel and 22-gauge stainless steel
• Spring-action lock allows opening of tool with one handed operation
• Features colour-coded, comfortable contoured grips
• Hardened handles for extra strength
• Convenient hanging hole for easy storage
• Conforms to ASME B107.500 performance standard

Klein Tools Combination Pliers – Insulated
(A-12098-EINS)

Key Features

• 1000 V Rated for safety on the job. VDE certified
• Unique, three-part insulation with white under-layer provides a warning sign that insulation may be compromised
• Multi-colour, sleek design with small thumb guards for ease of handling and easy storage in your toolbelt
• Crimping die behind hinge for superior leverage when crimping non-insulated connectors, lugs and terminals, and toothed pipe-grip for greater power
• Forged in the USA with custom, US-made tool steel for maximum durability
• Durable, moulded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools

Klein Tools Linesman Pliers, Insulated, 20cm
(A-12098A-EINS)

Key Features

• Durable moulded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2018 standards for insulated tools
• Precise jaw gap enables ease of use when twisting stranded copper wire during a final installation
• Crimping die behind hinge for superior leverage crimping of non-insulated connectors, lugs and terminals
• Heavy-duty cutting blades for long life
• Precision-machined pipe grip for greater gripping power

Klein Tools Diagonal Cutting Pliers, Insulated, Slim Handle, 21cm
(A-2000-28-EINS)

Key Features

• Insulated pliers are 1000V Rated for safety on the job and VDE Certified with unique three-part insulation, with a white underlayer that provides a warning sign when the insulation may be compromised
• Multi-colour, sleek design with small thumb guards, for ease of handling and easy storage in your toolbelt
• Cuts ACSR, screws, nails and most hardened wire
• Induction-hardened cutting knives for long life
• Made in the USA
• Hot-riveted joint for smooth action and no handle wobble
• Durable, moulded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools

Klein Tools Cutting Nippers, Insulated, 20cm
(A-2000-28A-EINS)

Key Features

• Durable moulded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2018 standards for insulated tools
• Cuts ACSR, screws, nails and most hardened wire
• Induction-hardened cutting knives for long life
• High leverage design has 36% more cutting power

Klein Tools  VDE Insulated Screwdrivers 
(Various Sizes)

A-32228INS: 75mm VDE Insulated Screwdriver, 2.5mm CAB Tip
A-32229INS: 100mm VDE Insulated Screwdriver, 3.0mm CAB Tip
A-32230INS: 100mm VDE Insulated Screwdriver, 3.5mm CAB Tip
A-32243INS: 100mm VDE Insulated Screwdriver, 4.0mm CAB Tip
A-32244INS: 125mm VDE Insulated Screwdriver, 5.5mm CAB Tip
A-32246INS: VDE Insulated Screwdriver, PoziDriv® No. 1, 80cm
A-32245INS: 150mm VDE Insulated Screwdriver, 6.5mm CAB Tip
A-32247INS: VDE Insulated Screwdriver, PoziDriv® No. 2, 100mm
A-32258INS: 80mm VDE Insulated Screwdriver – No. 1 Phillips Tip
A-32259INS: 100mm VDE Insulated Screwdriver – No. 2 Phillips Tip

Key Features

• Ergonomic handle for greater torque and comfort
• Anti-roll design prevents tool loss
• Clearly marked with the official 1,000-volt rating symbol
• Durable, moulded insulation meets or exceeds the IEC 60900 and ASTM F1505 standards for insulated tools

Klein Tools 14-in-1 HVAC Adjustable-Length Impact Screwdriver with Flip Socket
(A-32304)

Key Features

• Adjustable Screwdriver includes 1/4” and 5/16” nut drivers with 12 driver bits conveniently housed in the handle
• Adjustable-length blade for use with an impact driver or Klein Tools Cat. No. 32303 or 32907
• Multi-function 1/4” socket has both shallow (driver) and deep (bit holder) configurations for added versatility
• Impact-rated blade for use in an impact driver
• Powerful rare earth magnet securely holds bits and hex head fasteners
• Includes the most commonly used HVAC bits and nut drivers, all in one tool
• Includes No. 0, No. 1, No. 2 Phillips, 1/8” (3.2 mm), 3/16” (4.8 mm) and 1/4”(6.4 mm) Slotted, No. 2 Square, T10, T15, No. 2 JIS Bit, Schrader Valve Insertion bit and Core Removal bit
• Cushion-Grip™ handle for maximum comfort and torque
• Great for various applications including tight spaces, impact driving and long reach

Klein Tools DE Insulated Screwdriver, Square Drive No. 1, 180mm
(A-32319INS)

Key Features

• Ergonomic handles for greater torque and comfort
• Anti-roll design prevents tool loss
• Clearly marked with the official 1,000-volt rating symbol
• Durable, moulded insulation to meet or exceed all VDE standards for insulated tools
• Slim-profile insulation allows access to recessed screws
• Anti-roll design prevents tool loss

Klein Tools 4-Piece Ergonomic-Grip Insulated Screwdriver Set
(A-32690INS)

Key Features

• Ergonomic handles for greater torque and comfort
• Anti-roll design prevents tool loss
• Clearly marked with the official 1,000-volt rating symbol
• Durable, moulded insulation to meet or exceed all VDE standards for insulated tools
• Slim-profile insulation* allows access to recessed screws
• Set includes 3.0 mm and 4.0 mm, plus No. 1 and No. 2 Phillips tips
• Anti-roll design prevents tool loss

Klein Tools Electrician’s Pocket Knife
(A-44201)

Key Features

• Wire-stripping notches on the blade, stripping sizes 14-10 AWG.
• Satin 440A stainless steel drop-point blade
• Anodised aluminium handle for corrosion resistance
• Dual thumb studs for one-handed opening
• Liner lock secures blade in open position
• Pocket clip keeps knife readily available
• Great for stripping wire, splitting cable and performing everyday tasks

Klein Tools Flip Impact Socket Set, 7-Piece
(A-66070)

Key Features

• Flip Impact Socket Set includes ten sizes combined into five sockets plus two nested adapters
• Impact Socket Set includes 3/8” x 7/16”, 1/2” x 9/16”, 5/8” x 11/16”, 3/4” x 13/16” and 7/8” x 15/16” socket sizes
• Easy-to-use flip feature allows for quick changes and reduces the number of tools
• Nested adapters for dual drive (1/4”, 1/2”) capability; patent pending
• 6-point design is easier to position and work with square fasteners
• Great for hardware installations and removal
• Cross-hole design to prevent unintentional separation of adapter and socket
• Engineered for use with impact drivers including Klein’s 1/2-Inch Compact Impact Spanner (Cat. Nos. BAT20CW, BAT20CW1) and 1/4-Inch Compact Impact Driver (Cat. Nos. BAT20CD, BAT20CD1)
• Sockets are colour-coded to quickly identify size
• Includes case for storage

Klein Tools Pocket Knife, REALTREE XTRA™ Camo, Tanto Blade
(A-44222)

Key Features

• Black 440A, stainless steel, Tanto-style blade for superior edge retention and easy sharpening
• Rugged REALTREE XTRA™ camouflage handle with rubber finger grip holds up on the jobsite
• Half serrated, half fine-edged blade allows both slicing and piercing
• Lanyard hole allows knife to be tethered safely to prevent loss, or injury from a dropped knife
• Dual thumb studs for ambidextrous, one-handed opening
• Liner lock secures blade in open position
• Deep-pocket/low-carry pocket clip allows the knife to fit completely and securely into a pocket
• 3-1/2” blade length

Klein Tools Ratcheting Refrigeration Spanner, 5-1/2 Inch
(A-68310)

Key Features

• Spanner is designed for refrigeration packing gland nuts and valve stem sockets, as well as for beam-clamp installation
• Spanners are compact in size, with clearly marked sockets for four nut sizes
• Quick-flip reversing lever permits instant ratchet reversal
• Spanners are ruggedly built, with smooth edges for comfort
• Made in the USA
• A different size at each end
• Laminated construction for greater strength
• Chrome-plated finish for rust resistance

Klein Tools Straight-Hand Seamer, 76mm
(A-86522)

Key Features

• Compound-leverage mechanism bends, seams and flattens sheet metal easily and accurately
• 3” jaw folds 22-gauge steel and 24-gauge stainless steel
• Jaw marked in 1/4” increments for precise bending measurements
• All-steel construction and nickel-chrome-plated hardware for long life and durability
• Convenient self-opening latch for one-handed operation
• Quality tool for HVAC professionals provides superior results
• Comfortable, contoured grips cover hardened-steel handles

Klein Tools Offset Hand Seamer, 76mm
(A-86524)

Key Features

• Compound-leverage mechanism bends, seams and flattens sheet metal in hard-to-reach, confined spaces easily and accurately
• 3” jaw folds 22-gauge steel and 24-gauge stainless steel
• Jaw notched in 1/4” (6 mm) increments for precise bending measurements
• Comfortable, contoured grips cover hardened-steel handles
• All-steel construction and nickel-chrome-plated hardware for long life and durability
• Convenient self-opening latch for one-handed operation
• Quality tool for HVAC professionals provides superior results

Klein Tools HVAC Hand Notcher
(A-86526)

Key Features

• Cuts 30° V-shaped cuts in sheet metal quickly and easily to make corners
• Drop-forged, high-impact steel jaw with 13/16” (2.1 cm) maximum throat depth
• Jaw’s hook design allows easy notching of corners and take-off tabs without slipping
• For up to 24-gauge steel and 26-gauge stainless steel
• Comfortable, contoured grips cover hardened-steel handles
• All-steel construction and nickel-chrome-plated hardware provides long life and durability
• Convenient self-opening latch for one-handed operation
• Designed for HVAC professionals who want superior results

Klein Tools Snap-Lock Punch
(A-86528)

Key Features

• Drop-forged steel jaw easily punches 3/8” (1 cm) wide impressions on metal edges to join pieces of sheet metal, duct or pipe
• Compound-leverage mechanism for greater control and easy operation
• Comfortable, contoured grips cover hardened-steel handles
• All-steel construction and nickel-chrome-plated hardware provides long life and durability
• Convenient self-opening latch for one-handed operation
• For use on sheet metal, and vinyl and aluminium siding
• Quality tool for HVAC professionals provides superior results

Klein Tools Nylon Tie Tensioning Tool
(A-86570)

Key Features

• Nylon Tensioning Tool tensions up to 65 lbs (29.5 kg)
• Maximum tie width of 15/32” (1.2 cm)
• Designed for work with ties rated at 120-250 lbs (54.4 to 113 kg)
• Handle grips for comfort
• Feed end of tie through tip of tool
• Tighten with the tool handles and use the lever to cut off excess tie material

Klein Tools Nylon Tie Tensioning Tool with Auto Cut-Off
(A-86571)

Key Features

• Tensioning Tool automatically cuts off excess tie material
• Tensions up to 65 lbs (29.5 kg)
• Maximum tie width of 15/32” (1.2 cm)
• Designed to work with ties rated at 120 to 250 lbs (54.4 kg to 113 kg)
• Feed end of tie through tip of tool
• Tighten with the tool handles – excess tie material is automatically cut off
• Increase tension by turning the knob clockwise

Klein Tools Professional Tube Cutter
(A-88904)

Key Features

• Accurate 4-roller tracking system – no spiralling
• Professional reaming tool
• Extra cutting wheel included; simply remove screw in the back and open the handle to access
• Replacement cutting wheel available (Cat. No. 88905)

Klein Tools Professional 4-in-1 Tube Bender
(A-89030)

Key Features

• Tube Bender bends four popular tube sizes
• Calibrated markings for accurate left-hand, right-hand and offset bends up to 90°
• For soft copper, aluminium and steel tubing
• Bends 3/16” (0.5 cm), 1/4” (0.6 cm), 5/16” (0.8 cm) and 3/8” (1 cm) O.D. tubing

Klein Tools Duct Cutter with Wire Cutter
(A-89554)

• All-steel double edge blade easily cuts fibre board, fibreglass-lined and flexible ducts
• Built-in wire cutter for convenience
• Compound-leverage mechanism for easy wire cutting
• Comfortable, contoured grips cover hardened-steel handles
• All-steel construction and nickel-chrome-plated hardware provides long life and durability
• Convenient self-opening latch for one-handed operation
• Designed for HVAC professionals who want superior results

The CP4 is a multi-purpose pouch that can hold a variety of small tools and accessories for service, repair or installation jobs as well as a perfect weekend travel pouch for small items.

Key Features

• Product Specifications: (H x L x W) 153mm x 254mm x 75mm | Weight: 450g
• Maximised Tool Storage Capacity: 4 Tool pockets of various sizes | Small Meter Storage Pocket | D-Rings: 1 large 1.5″ D-Ring | Cable and Accessory Pockets
• Rugged Material & Construction: Weatherproof, rubberised bottom | Weatherproof Body Fabric – 600 PVC Impregnated Denier Nylon | Weatherproof Inside Pocket Fabric – 600 PVC Impregnated Denier Nylon | 1/4″ Piping for gripping with fingers | Inside mesh pocket | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | D-Ring – Powder coated steel | Stitching – Industrial strength double nylon stitching

Veto Pro Pac CT-XL Cargo Tote Tool Bag
(VETOCTXL)

The CT-XL is a high quality tool storage product and perfect catch-all bag for raiding the van, carry-all bag for end of the day cleanup, and a more efficient way to organise the back of the truck.

Key Features

• Product Specifications: (H x L x W) 420mm x 432mm x 241mm
• Maximised Tool Storage Capacity: 5 Tiered pockets | D-Rings – 2 large and 2 small
• Rugged Materials & Construction: 3mm thick polypropylene waterproof base | 1800 denier body fabric | Leather handle grips

Veto Pro Pac DR-XL Contractor Tool Bag
(VETODRXL)

The Veto DR-XL is a compact gate mouth style bag with which offers more capacity when needed. With the padded adjustable panel system you can secure chargers and batteries for cordless power tools. The internal panel system can also be removed allowing the Veto DR-XL to double as a go-to tool bag.

Key Features

• Product Specifications: (H x L x W) 293mm x 407mm x 229mm. (Height is with handle folded down.) | Weight: 2.7kg (empty)
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 30 exterior tool pockets of various sizes | Customisable and removable velcro panel system | Manifold gauge and hose storage space | Metal YKK Zippers | 4 Powder coated steel D-Rings
• Rugged Materials & Construction: Waterproof Base – 3mm injection molded polypropylene | Waterproof Body Fabric – 1800 PVC impregnated denier nylon | Handle – injection molded nylon plastic w/ over-molded rubber grip | Zippers – double-stitched, heavy duty (interlocking) YKK with oversized zipper tabs | Rivets – zinc, marine grade rivets | Stitching: industrial strength double nylon stitching

Veto Pro Pac LC Contactor Tool Bag
(VETOLC)

The Veto LC has the versatility to organise, store and protect a variety of hand tools, meters, butt-sets and more. It offers transport-plane-like storage with 57 pockets capable of handling 75 hand tools.

Key Features

• Product Specifications: (H x L x W) 300mm x 340mm x 240mm (with handle folded down | Weight (empty): 3.3kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets (inside) – 48 inside & 3 outside | Flat Zippered Pockets (outside) – 4 inside & 2 outside | Neoprene Pockets – none | D-Rings – 4 large and 2 outside | Exterior Electrical Tape Loop – 8″ fabric with clip closure | Stainless Steel Tape Clip – Yes
• Rugged Materials & Construction: Waterproof Base – 3mm injected molded polypropylene | Waterproof Body Fabric – 1800 PVC impregnated denier nylon | Waterproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Handle – Injection molded nylon plastic w/ over-molded rubber grip | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Fold-back Snaps – 6 zinc, marine grade | D-Rings – Powder coated steel | Rivets – 38 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching
• Other Features: Shoulder Strap – Heavy duty, non-slip padded shoulder strap with velcro handle connection

Veto Pro Pac MB Meter Bag
(VETOMB)

The MB is a clip-on meter bag designed to hold a small selection of tools plus one or two meters. This handy little bag will clip easily on to all of Veto’s larger Tool Bags. Store your meters, diagnostics and repair tools and clip it on to any VETO bag for convenient carrying. The MB also features a detachable rubber handle.

Key Features

• Product Specifications: (H x L x W) 250mm x 200mm x 75mm | Weight (empty): 1kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets: 8 inside & 2 outside | Meter pockets – 2 | D-Rings – 4 small
• Rugged Materials & Construction: Durable leather trim panels | Nylon plastic connection clip | 600 PVC impregnated denier nylon body | 1200 PVC impregnated denier nylon tool pockets | Zippers – Double stitched, heavy duty plastic coil zippers | D-Rings – Powder coated steel | Stitching – Industrial strength double nylon stitching

Veto Pro Pac MB2 Meter Bag
(VETOMB2)

The MB2 features rugged construction, roomy pockets, interior cushioning, heavy duty zippers and a detachable rubber handle. This MB2 offers tradesmen a meter bag or a small tool bag.

Key Features

• Product Specifications: (H x L x W) 330mm x 200mm x 75mm | Weight (empty): 1kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets: 8 inside & 2 outside | Meter Pockets – 2 | D-Rings – 4 small
• Rugged Materials & Construction: Durable leather trim panels | Nylon plastic connection clip | 600 PVC impregnated denier nylon body | 1200 PVC impregnated denier nylon tool pockets | Zippers – Double stitched, heavy duty plastic coil zippers | D-Rings – Powder coated steel | Stitching – Industrial strength double nylon stitching

Veto Pro Pac MC Tool Bag
(VETOMC)

The MC is small, lightweight and perfect for troubleshooting, diagnostics and job specific setups. It offers 20 interior and exterior pockets for handling tools, meters and a compact cordless drill/driver compartment. The MC allows technicians and contractors the ability to set up multiple job specific bags that can also feed out of the VETO LC, XL or XXL-F size bags. The MC holds plenty of essential tools for different types of work and is convenient enough to carry everywhere, including tight spaces.

Key Features

• Product Specifications: (H x L x W) 320mm x 250mm x 200mm | Weight (empty): 1.9kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 20 interior and exterior | D-Rings – 2 large and 5 small | Meters and compact cordless drill/driver compartment
• Rugged Materials & Construction: Waterproof Base – 3mm injection molded polypropylene | Waterproof Body Fabric – 1200 PVC impregnated denier nylon | Waterproof Tool Pocket Fabric – 1200 PVC impregnated denier nylon | Handle – Webbed handle with over-molded rubber grip | Zippers – Double stitched, Heavy duty plastic coil zippers with oversized zipper tabs | D-Rings – Powder coated steel | Rivets – 38 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching

Veto Pro Pac OT-LC Open Top Tool Bag
(VETOOTLC)

The OT-XL is an open-top tool bag that holds up to 75 tools and gear like cordless drills, extension cords, caulk guns and anything else that fits. Top-in loading and unloading allows for a less disciplined grab and bolt approach without sacrificing durability or comfort.

Key Features

• Product Specifications: (H x L x W) 370mm x 340mm x 240mm (Height is 305mm with Handle Folded Down) | Weight (empty): 3.5kg
• Maximised Tool Storage Capacity: Vertical Tiered Tool Pockets – 36 | Flat Zippered Pockets – 4 | D-Rings – 2 large and 4 small | Stainless Steel Tape Clip – Yes
• Rugged Materials & Construction: Waterproof Base – 3mm injection molded polypropylene | Waterproof Body Fabric – 1800 PVC impregnated denier nylon | Waterproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Handle – Injection molded nylon plastic w/ over-molded rubber grip | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Fold-back snaps – 6 zinc, marine grade | D-Rings – Powder coated steel | Rivets – 38 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching
• Other Features: Shoulder Strap – Heavy duty, non-slip padded shoulder strap with velcro handle connection

Veto Pro Pac OT-XL Open Top Tool Bag
(VETOOTXL)

The OT-XL is the open-top version of the award winning Veto Pro Pac XL, featuring the same sturdy construction and ergonomic features, but offering internal vertical pockets and open spaces to store larger punch-list items.

Key Features

• Product Specifications: (H x L x W) 430mm x 420mm x 240mm (Height is 318mm with Handle Folded Down) | Weight (empty): 3.5kg
• Maximised Tool Storage Capacity: Vertical Tiered Tool Pockets – 40 | Flat Zippered Pockets – 4 | D-Rings – 2 large and 4 small | Stainless Steel Tape Clip – Yes
• Rugged Materials & Construction: Waterproof Base – 3mm injection molded polypropylene | Waterproof Body Fabric – 1800 PVC impregnated denier nylon | Waterproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Handle – Injection molded nylon plastic w/ over-molded rubber grip | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Fold-back snaps – 6 zinc, marine grade | D-Rings – Powder coated steel | Rivets – 38 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching
• Other Features: Shoulder Strap – Heavy duty, non-slip padded shoulder strap with velcro handle connection

Veto Pro Pac PB4 Parts Bag Set
(VETOPB4)

Veto Pro Pac’s PB4 Parts Bag Set is a 4-Pac solution to your clutter dilemma.

Key Features

• Product Specifications: (H x L) 185mm x 267mm
• Features: Stores small tools, fasteners, wire nuts and assorted items | Multi-purpose for jobsite and everyday use | Zippered access
• Rugged Materials & Construction: 600 Denier Nylon Body Fabric – reduces wear and tear | Reinforced See Through Side Mesh Panel – clear visibility of contents | YKK Zippers | Colour Coded Webstrips | Swivel Snap Hooks | attaches to any VETO Pro Pac tool bag’s D-Rings

Veto Pro Pac PB4L Large Part Bags
(VETOPB4L)

4 x Veto Pro Pac PB4L Large Part Bags. With 600 denier nylon body fabric reducing wear and tear, the Veto Pro Pac PB4L can take just about whatever you can throw at it. The reinforced see through side mesh panel gives you clear visibility of what is inside, and stay organised with colour coded webstrips as well.

Key Features

• Product Specifications: (H x L) 230mm x 305mm
• Features: Zippered access | Color coded webstrips | Swivel snap hooks attaches to any Veto Pro Pac tool bag | Stores small tools, fasteners, wire nuts and other assorted items | Multi-purpose for job site and everyday use
• Rugged Materials & Construction: 600 Denier Nylon Body Fabric – reduces wear and tear

Veto Pro Pac PB5 Tool Part Bags
(VETOPB5)

5 x Veto Pro Pac PB5 Part Bags. With 600 denier nylon body fabric reducing wear and tear, the Veto Pro Pac PB5 can take just about whatever you can throw at it. The reinforced see through side mesh panel gives you clear visibility of what is inside, and stay organised with colour coded webstrips as well.

Key Features

• Product Specifications: (H x L) 230mm x 140mm
• Features: Zippered access | Color coded webstrips | Swivel snap hooks attaches to any Veto Pro Pac tool bag | Stores small tools, fasteners, wire nuts and other assorted items | Multi-purpose for job site and everyday use
• Rugged Materials & Construction: 600 Denier Nylon Body Fabric – reduces wear and tear

Veto Pro Pac Tech LC Tool Bag
(VETOTECHLC)

The Tech LC is a service technician version of the original Model LC. A number of changes have been made to tailor the bag to accommodate HVAC service technicians’ tools and work routines. The Tech LC sports 53 pockets with ample pocket room for hand tools, a parts box(es), meter(s), a cordless impact drill and other bulkier items. 8 new small neoprene pockets have been added for drill bits and bit extensions.

Key Features

• Product Specifications: (H x L x W) 480mm x 350mm x 240mm (Height is 310mm with Handle folded down | Weight (empty): 2.5kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 50 inside & 3 outside | Flat Zippered Pockets – 4 inside & 2 outside | Neoprene Pockets – 2 | D-Rings – 4 large and 5 small | Exterior Electrical Tape Loop – 8″Fabric with Clip Closure | Stainless Steel Tape Clip – Yes
• Rugged Materials & Construction: Waterproof Base – 3mm injection molded polypropylene | Waterproof Body Fabric – 1800 PVC impregnated denier nylon | Waterproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Handle – Injection molded nylon plastic w/ over-molded rubber grip | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Fold-back Snaps – 6 zinc, marine grade | D-Rings – Powder coated steel | Rivets – 38 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching
• Other Features: Shoulder Strap – Heavy duty, non-slip padded shoulder strap with clip-on connection

Veto Pro Pac Tech MC Tool Bag
(VETOTECHMC)

Veto Pro Pac’s Tech MC is a compact, yet fully featured service, repair or installation tool bag that features everything you have come to expect from Veto Pro Pac: Veto Pro Pac’s patented centre panel, heavy duty construction and stabilising injection molded waterproof base that keeps tools dry, even in the nastiest of conditions.

Key Features

• Product Specifications: (H x L x W) 305mm x 254mm x 203mm (254mm inside vertical storage for long shank tools | Weight (empty): 2.3kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 38 interior and exterior tool pockets of various sizes | 2 Storage Bays – Hand tools on one side; Meter and drill storage on the other side | 2 Neoprene Pockets on Meter side | D-Rings: 2 – 51mm and 5 – 25.5mm | Outside Mounted Stainless Steel Tape Clip Holder | Quick Access Pocket for Drill Bit Extensions and Small Items
• Rugged Materials & Construction: Weatherproof Base – 3mm injection molded polypropylene | Weatherproof Body Fabric – 1200 PVC impregnated denier nylon | 8″ Electrical Tape Strap | Over-molded ergonomic grip | Can hold over 50 tools | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | D-Rings – Powder coated steel | Rivets – marine grade rivets

Veto Pro Pac Tech MCT Tool Bag
(VETOTECHMCT)

The Tech MCT is small, lightweight and perfect for troubleshooting, diagnostics and job specific setups and offers 44 interior and exterior pockets for handling tools, meters, and a compact cordless drill/driver compartment.

Key Features

• Product Specifications: (H x L x W) 360mm x 260mm x 210mm | Weight: 2.6kg
• Maximised Tool Storage Capacity: 44 interior and exterior pockets of varying sizes | 31cm of vertical storage zipped up | Outside mounted stainless tape clip | Electrical tape strap | Holds over 50 hand tools
• Rugged Materials & Construction: Waterproof base | 3mm polypropylene | Extra wide padded shoulder strap | Over-molded ergonomic grip

Veto Pro Pac Tech OT-LC Tool Bag
(VETOTECHOTLC)

The TECH OT-LC is a large capacity wide open tote with removable/swappable vertical pocket panels, and additional open space that can be reoriented accommodating multiple tools and gear for a variety of tasks.

Key Features

• Product Specifications: (H x L x W) 457mm x 305mm x 406mm (Height is 305mm with Handle Folded Down) | Weight (empty): 3.5kg
• Maximised Tool Storage Capacity: 43 Available Pockets | V-SWAP™ Removable Tool Pocket Panel System | Optional Bulk Panel Storage Included | 2 Movable Plastic Partitions | Holds Up To 4 Removable Insert Boxes | 1 Magnetic Lid and Insert Boxes | Exterior Utility Pocket

Veto Pro Pac Tech OT-MC Tool Bag
(VETOTECHOTMC)

The TECH OT-MC is a compact “open-top” tool bag with an internal plastic box, housing a repositionable insert box that allows you to customise your storage space options. The TECH OT-MC also features multiple vertical tool pockets for quick & easy access.

Key Features

• Product Specifications: (H x L x W) 458mm x 254mm x 204mm (Height is to top of handle) | Weight: 2.3kg
• Maximised Tool Storage Capacity: 28 Interior & Exterior Pockets | Outside Mounted Stainless Steel Tape Clip | Interior Injection Molded Plastic Box with Smaller Repositionable “Insert” Box with Lid
• Rugged Materials & Construction: Waterproof 3mm polypropylene base | Over-molded ergonomic grip | Extra wide padded shoulder strap

Veto Pro Pac Tech OT-SC Tool Bag
(VETOTECHOTSC)

The TECH OT-SC is a sub-compact open-top “electrician’s tote” style bag. An integral structural box that features a repositionable inset box & lid, as well as a removable partition divider, providing customisation of the rigid storage space (additional insert boxes and partitions sold separately). The bag also features multiple vertical tool pockets for quick & easy access for a variety of service tools & equipment.

Key Features

• Product Specifications: (H x L x W) 260mm x 255mm x 330mm | Weight (empty): 2.5kg
• Maximised Tool Storage Capacity: 27 Available Pockets of Varying Sizes | 1 Removable Plastic Partition & Insert Box with Lid | 8″ Electrical Tape Strap | Exterior Utility Pocket
• Rugged Materials & Construction: Waterproof polypropylene base for moisture and abrasion protection | Over molded ergonomic grip | Detachable padded shoulder strap

Veto Pro Pac Tech Pac Backpack Tool Bag
(VETOTECHPAC1)

Veto Pro Pac’s Tech Pac is Veto’s first backpack tool bag designed specifically for professional tradesmen who need to climb ladders or walk long distances on a daily basis. With 46 pockets inside and out, the Tech Pac has ample room for hand tools, meters, parts boxes, cordless drills and impact drivers, as well as other bulkier items such as manifold gauges, hoses, cable wires and even a tablet. It also includes D-rings, bit extension and memory stick pockets, and a stainless steel tape clip.

Key Features

• Product Specifications: (H x L x W) 555mm x 360mm x 250mm (Height is 460mm with handle folded down) | Weight (empty): 4.2kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 46 interior and exterior tool pockets of various sizes | 2 Storage Bays – 4 Storage Platforms | D-Rings – 4 large and 5 small | Outside Mounted Stainless Steel Tape Clip Holder | Cable and Accessory Pockets
• Rugged Materials & Construction: Weatherproof Base – 3mm injection molded polypropylene | Weatherproof Body Fabric – 1200-950 PVC impregnated denier nylon | Weatherproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Quick Release Metal Hasp – Allows easy access to Rear Storage Bay and creates positive shoulder strap load connection | Internally stored aluminium hook to hang bag | Over-molded ergonomic grip | Padded EVA thermoformed, ergonomic back padding | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | D-Rings – Powder coated steel | Rivets – marine grade rivets | Stitching – Industrial strength double nylon stitching | Adjustable padded shoulder straps

Veto Pro Pac Tech Pac LT Laptop Backpack Tool Bag
(VETOTECHPACLT)

Veto Pro Pac’s Tech Pac LT is the ultimate laptop backpack tool bag designed specifically for professional tradesmen who need to climb ladders, frequently go up and down stairs or walk long distances on a daily basis and need tools and technology storage. With 27 pockets inside and out, the Tech Pac LT has ample room for hand tools, cable wires, a laptop, tablet and business accessories and more. The Tech Pac LT’s center panel design offers dual bays with two storage platforms in each bay. The center panel design with the main tool storage options on each side centers and stabilizes the backpack. It also includes D-rings, extra pockets on the top of the front side, and a stainless steel tape clip.

Key Features

• Product Specifications: (H x L x W) 480mm x 360mm x 220mm | Weight (empty): 3.5kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 27 interior and exterior tool pockets of various sizes | 2 Storage Bays – 4 Storage Platforms |  Front bay for tool storage | Back bay for laptop-, tablet, folders and business accessories | D-Rings – 2 large and 4 small | Outside Mounted Stainless Steel Tape Clip Holder | Cable and Accessory Pockets
• Rugged Materials & Construction: Weatherproof Base – 3mm injection molded polypropylene | Weatherproof Body Fabric – 750 and 1250 PVC impregnated denier nylon | Weatherproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Internally stored aluminium hook to hang bag | Over-molded ergonomic grip | Padded EVA thermoformed, ergonomic back padding | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | D-Rings – Powder coated steel | Rivets – Marine grade rivets | Stitching – Industrial strength double nylon stitching | Adjustable padded shoulder pads

Veto Pro Pac Tech XL Tool Bag
(VETOTECHXL)

The TECH-XL is a service technician version the original Model XL. A number of changes have been made to tailor the bag to accommodate service technicians’ tools and work routines. The TECH-XL sports 80 pockets with ample pocket room for hand tools, parts boxes, meters, a cordless impact drill and other bulkier items. 9 small neoprene pockets have been added for drill bits and bit extensions.

Key Features

• Product Specifications: (H x L x W) 527mm x 420mm x 240mm (380mm height with handle folded down) | Weight (empty): 4.6kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 80 interior and exterior pockets of various sizes | Neoprene Pockets – 2 large, 3 medium and 9 small (for bits and memory sticks) | D-Rings – 4 large and 5 small | 8″ Electrical Tape Strap | Stainless Steel Tape Clip – Yes
• Rugged Materials & Construction: Weatherproof Base – 3mm injection molded polypropylene | Weatherproof Body Fabric – 1800 PVC impregnated denier nylon | Weatherproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Handle – Injection molded nylon plastic w/ over-molded ergonomic rubber grip | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Fold-back Snaps – 6 zinc, marine grade | D-Rings – Powder coated steel | Rivets – 38 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching | Shoulder Strap – Extra-wide, heavy duty, padded shoulder strap clips onto handle

Veto Pro Pac Tech Pac Camo Backpack Tool Bag
(VETOTP1CAMO)

The Tech Pac Camo backpack tool bag is designed specifically for professional tradesmen who need to climb ladders or walk long distances on a daily basis. The Camo version features TRUETIMBER’s KANATI pattern, YKK locking zippers, a magnetic screw catcher, metal shoulder strap sliding buckles, light gray interior pockets for better visibility, redesigned front top pockets for better storage and a redesigned stainless steel tape clip holder.

Key Features

• Product Specifications: (H x L x W) 547mm x 362mm x 251mm (Height with handle folded down) | Weight (empty): 4.1kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 56 interior and exterior tool pockets of various sizes | 2 Storage Bays – 4 Storage Platforms | Manifold Gauge and Hose Storage Pocket | D-Rings – 4 large and 5 small | Outside Mounted Stainless Steel Tape Clip Holder | Cable and Accessory Pockets
• Rugged Materials & Construction: Weatherproof Base – 3mm injection molded polypropylene | Weatherproof Body Fabric – 950 and 1250 PVC impregnated denier nylon | Weatherproof Light Gray Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Quick Release Metal Hasp – allows easy access to Rear Storage Bay | Strap Load Connection | Internally stored aluminium hook to hang bag | Over-molded ergonomic grip | Padded EVA thermoformed, ergonomic back padding | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Metal shoulder strap sliding buckles | D-Rings – Powder coated steel | Rivets – Marine grade rivets | Stitching – Industrial strength double nylon stitching | Adjustable padded shoulder straps

Veto Pro Pac Tech Pac Hi-Viz Backpack Tool Bag
(VETOTP1HV)

The Tech Pac Hi-Viz features Veto Pro Pac’s patented center panel, heavy duty construction and stabilising injection molded waterproof base that keeps tools dry, even in the nastiest of conditions. This backpack is also made for comfort with a thermo-formed EVA padded back panel that helps cushion the load (which also provides structural stability), a padded load displacing shoulder strap system with multiple adjustment strap points and an ergonomic TPV rubber grip.

Key Features

• Product Specifications: (H x L x W) 547mm x 362mm x 251mm (Height is 461mm with handle folded down) | Weight (empty): 4.1kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 56 interior and exterior tool pockets of various sizes | 2 Storage Bays – 4 Storage Platforms | Manifold Gauge and Hose Storage Pocket | D-Rings – 4 large and 5 small | Outside Mounted Stainless Steel Tape Clip Holder | Cable and Accessory Pockets
• Rugged Materials & Construction: Weatherproof Base – 3mm injection molded polypropylene | Weatherproof Body Fabric – 950 and 1250 PVC impregnated denier nylon | Weatherproof Light Gray Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Quick Release Metal Hasp – allows easy access to Rear Storage Bay | Strap Load Connection | Internally stored aluminium hook to hang bag | Over-molded ergonomic grip | Padded EVA thermoformed, ergonomic back padding | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Metal shoulder strap sliding buckles | D-Rings – Powder coated steel | Rivets – Marine grade rivets | Stitching – Industrial strength double nylon stitching | Adjustable padded shoulder straps

Veto Pro Pac TP3 Diagnostic Tool Bag
(VETOTP3)

The TP3 is a clip-on diagnostics bag designed to hold a meter and a variety of tools. When not in use, it can clip onto any model VETO Pro Pac tool bag’s tape clip or D-Rings, so it is the perfect small/portable bag to compliment your larger Veto tool bags.

Key Features

• Product Specifications: (H x L x W) 230mm x 160mm x 100mm | Weight (empty): 1kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 4 inside and 11 outside | 3 Long Shanked Tool Pockets | 1 Meter Pocket | D-Rings – 2 small | 8″ Electrical Tape Strap
• Rugged Materials & Construction: Leather trim panels | D-Rings – Powder coated steel | Detachable rubber handle | Nylon plastic connection clip

Veto Pro Pac TP4 Diagnostic Tool Bag
(VETOTP4)

The TP4 is a clip-on diagnostics bag designed to hold a meter and a variety of tools. When not in use, it can clip onto any model Veto tool bag’s tape clip or D-Rings. It features 20 pockets of various sizes including bit pockets, vertical long shank pockets, a detachable rubber handle and other features that will accommodate the most commonly used tools to diagnose and repair problems on service calls.

Key Features

• Product Specifications: (H x L x W) 240mm x 200mm x 120mm | Weight (empty): 1.3kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 20 interior and exterior | 2 Vertical Long Shank Side Tool Pockets | D-Rings – 2 small | 8″ Electrical Tape Strap
• Rugged Materials & Construction: Leather trim panels | D-Rings – Powder coated steel | Detachable rubber handle | Nylon plastic connection clip

Veto Pro Pac TP4B Tool Service Pouch
(VETOT4B)

The TPB4 is a Next Generation revised version of the TP4 with a hard bottom, extra tool pocket depth and riveted stainless steel tape measure clip. This service pouch stands up, bottom protected and ready to help carry and organise your most needed tools for any job or service call.

Key Features

• Product Specifications: (H x L x W) 280mm x 115mm x 203mm | Weight (empty): 0.9kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 20 interior and exterior | 2 Vertical Long Shank Side Tool Pockets | D-Rings – 2 small | 8″ Electrical Tape Strap
• Rugged Materials & Construction: Leather trim panels | D-Rings – Powder coated steel | Detachable rubber handle | Metal connection clip

Veto Pro Pac XLT Laptop Tool Bag
(VETOXLT)

The XLT is a true hybrid laptop tool bag that is built to accommodate whatever kind of work order is on the books. Store your laptop or tablet, hand tools and meters, digital camera, safety glasses, calculator and all the accessories that you need. Designed to accommodate any situation with proper technology and tool storage, creating a mobile office built for jobsite success.

Key Features

• Product Specifications: (H x L x W) 515mm x 240mm x 420mm (Height is 370mm with handle folded down) | Weight (empty): 5kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 33 inside and 3 outside | Flat Zippered Pockets – 1 inside and 3 outside | Neoprene Pockets – 6 large, 2 medium, 4 small | Horizontal Magnetic Flapped Pockets – 2 | D-Rings – 4 large and 4 small | Exterior Electrical Tape Loop – 8″ Fabric with Clip Closure | Stainless Steel Tape Clip – Yes
• Rugged Materials & Construction: Waterproof Base – 3mm injection molded polypropylene | Waterproof Body Fabric – 600 PVC impregnated denier nylon | Waterproof Tool Pocket Fabric – 600 PVC impregnated denier nylon | Handle – Injection molded nylon plastic with over-molded rubber grip | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tab | Fold-back Snaps – 10 zinc, marine grade | D-Rings – Powder coated steel | Rivets – 46 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching | Laptop storage | PDA/Phone Storage | Shoulder Strap – Heavy duty, non-slip pad, clip-on connection

Veto Pro Pac XXL-F Contractor Tool Bag
(VETOXXLF)

The XXL-F bag is the “soft side” version of a classic carpenter’s wooden tool box. It stores longer tools like hand saws, framing squares, pry bars, framing hammers, etc. It also offers ergonomic transportation and protection on and off the jobsite.

Key Features

• Product Specifications: (H x L x W) 432mm x 648mm x 242mm (Height is with handle folded down) | Weight (empty): 5.9kg
• Maximised Tool Storage Capacity: Vertical Tool Pockets – 48 inside and 3 outside | Flat Zippered Pockets (outside) – 4 inside and 2 outside | Neoprene Pockets – none | D-Rings – 4 large and 5 small | Exterior Electrical Tape Loop – 8″ Fabric with Clip Closure | Stainless Steel Tape Clip – Yes
• Rugged Materials & Construction: Waterproof Base – 3mm injection molded polypropylene | Waterproof Body Fabric – 1800 PVC impregnated denier nylon | Waterproof Tool Pocket Fabric – 1800 PVC impregnated denier nylon | Handle – Injection molded nylon plastic with over-molded rubber grip | Zippers – Double stitched, heavy duty plastic coil zippers with oversized zipper tabs | Fold-back Snaps – 6 zinc, marine grade | D-Rings – Powder coated steel | Rivets – 38 zinc, marine grade rivets | Stitching – Industrial strength double nylon stitching | Shoulder Strap – Heavy duty, non-slip padded shoulder strap with velcro handle connection